Aluminum Fence.
Ornamental, no rust.

An aluminum fence in that scope — 350 linear feet of 4-foot residential-grade aluminum picket with two walk gates — typically runs $11,000 to $22,000 turnkey in Canada in 2026. Supply-only on the same scope is roughly $6,000 to $11,000. Cost breaks down as: panels at $35 to $70 per linear foot supply, posts at $45 to $90 each (frost-line dependent), walk gates at $400 to $900 each, hardware and freight 8-12% of materials, installation labour at $10 to $40 per linear foot. The two biggest variables are tier (residential vs. commercial AAMA 2604 finish) and post depth — a Calgary install with a 5-foot frost line will cost more in posts and concrete than a Toronto install on the same dimensions. We quote itemized: panels, posts, gates, hardware, freight, and install as separate lines so you see exactly what changes if you adjust scope.

Powder-coated aluminum fence has a service life of 30 to 50 years in Canadian climates with minimal maintenance — that's the longest of any fenced material we supply outside of solid wrought-iron-on-steel. Aluminum doesn't rust (the metal forms a self-protecting oxide layer), doesn't rot, and the AAMA 2604 powder-coat finish carries a 10-year warranty against fade and chalk and typically performs for 20-25 years before any touch-up. Aluminum deck railing — same alloy, same finish system — lasts the same range. The wear items are the hinges, latches, and gate hardware on operable gates, which we recommend lubricating annually. Coastal installations (Halifax, Vancouver Island, St. John's) and road-salt-heavy roadsides may see finish chalking sooner; spec marine-grade aluminum (6005-T5 or 6063-T6 with chromate primer) for those sites.

Aluminum fence is typically 20-50% more expensive than wood at install, but cheaper across a 25-year horizon because wood needs re-staining every 3-5 years and panel replacement at year 15-20. Supply-only: pressure-treated wood board fence is $20 to $40 per linear foot, cedar board $30 to $50, aluminum picket $35 to $70. Over 25 years a $30/ft cedar fence costs roughly $30 build + $15 in stain cycles + $20 in replacement = $65/ft total. A $50/ft aluminum fence over the same 25 years is $50 + maybe $2 in hinge service = $52/ft. The aluminum break-even varies by climate — drier prairies stretch wood life, coastal Atlantic and high-precipitation BC shorten it. Choose wood for warmth and screening, aluminum for low-maintenance and a tighter long-run budget.

Aluminum is one of the best fence choices for Canadian residential properties when you need ornamental appearance, low maintenance, and long service life — but it isn't a privacy material. Pros: doesn't rust through freeze-thaw, no rot, doesn't warp, powder-coat survives road salt and UV, 30-50 year service life, gates align without seasonal shimming, and the picket profile suits both heritage and modern homes. Cons: not a privacy screen (you see through it), softer than steel so a vehicle impact will dent panels, premium upfront cost vs. wood or chain-link, and dark powder-coat shades show abrasion. Strong use cases: pool enclosures (compliant with Quebec 2025 and Ontario PSWA 2015), front-yard ornamental, ravine-edge property lines, and any site where you want the fence to disappear into the landscape. Pair with privacy hedge if you need screening too.

The main disadvantages of aluminum fence are: no privacy (you see straight through the picket spacing — typically 4 inches), mechanical softness compared with steel or wrought-iron (a vehicle bump or lawn-tractor impact will dent rather than bounce), higher upfront cost than wood or chain-link, finish abrasion shows more on darker shades, and aluminum doesn't block sound. Limitations to know: it isn't suitable as a security fence by itself for high-risk sites — palisade steel or anti-climb mesh is the right call there — and the residential-grade alloys can deflect if pushed by snow load piled against a long unbraced run. The trade-off is that aluminum solves the durability and maintenance problems that wood and wrought-iron struggle with, so the choice depends on what you're optimizing for: aluminum for low-maintenance ornamental, steel for security, wood or vinyl for privacy.

Yes — aluminum is one of the top three deck-railing materials for Canadian decks, alongside powder-coated steel and glass-with-aluminum-post systems. It handles -40°C to +35°C without dimensional movement, doesn't ice-fuse like wood, the powder coat resists chloride from ice melt, and it meets the OBC, NBC, and BC Building Code 42-inch rail height and 100-mm baluster spacing requirements out of the box. Limits: avoid mounting aluminum railing directly to PT wood — the alkaline copper preservative in PT will corrode aluminum over time; use plastic or nylon isolators at the fastener interface. For commercial decks (multi-residential balconies, restaurant patios) spec AAMA 2604 powder-coat and 6005-T5 alloy at minimum; for snow-loaded mountain or Atlantic decks confirm post spacing with the manufacturer engineering tables.